| Length | Stock | |
|---|---|---|
| 2,1 m | 10 m | |
| 3 m | 3 m |
LUMO Out 35×31 Heat-treated Aspen, Sàvu Collection
NEW! LUMO Out 35 × 31 mm is a dark brown Sávu Collection illuminated slatted panel made from Finnish heat-treated aspen. In the LUMO Out profile, the light opens towards the tongue side of the panel. The pre-shaped lighting groove is designed for the Cariitti Sauna Ultra Ambient White Top IP67 LED strip, allowing indirect lighting to be seamlessly integrated into the wood surface.
Read more
LUMO Out can be combined with LUMO Base and LUMO In slatted panels as well as other Pieksäwood panels. The LUMO Collection has been designed especially for use with the 15 × 120 mm STS 0 panel. The pre-shaped tongue-and-groove LUMO panels make it easy to create individual, indirectly illuminated wall and ceiling surfaces without separate lighting housings or recesses.
Read more
* In the pack 4 pcs
Product available. Estimated delivery time 1–3 days
The product’s raw material is available. Delivery time 1–2 weeks
The product or raw material is currently not available. Request delivery time: Contact us
- Product in stock
- Preform inventory balance
Length Preform inventory balance 2,1 m 428 m 3 m 0 m - Technical data
Thickness 35 mm
Width 31 mm
Material Sávu Heat-Treated
Length 2,1 m, 3 m
Certificates CE, PEFC, The Association for Finnish Work
- Description
LUMO Out 35×31 Heat-Treated Aspen, Sávu Collection
LUMO Out is part of the LUMO Collection slatted panel system designed for Pieksäwood by designer Minna Haapakoski, allowing indirect lighting to be seamlessly integrated into natural wood surfaces.
LUMO Out is a 35 × 31 mm illuminated slatted panel with a pre-shaped lighting groove for indirect lighting. In the LUMO Out profile, the light opens towards the tongue side of the panel. The lighting groove is designed for the Cariitti Sauna Ultra Ambient White Top IP67 LED strip. This allows the LED strip to be installed as an integral part of the panelling without separate housings or recesses. The solution is suitable for both walls and ceilings.
LUMO Out can be combined with LUMO Base and LUMO In slatted panels as well as other Pieksäwood panels. The LUMO Collection has been designed especially for use with the 15 × 120 mm STS 0 panel. By combining three different slatted panels, continuous panel surfaces and indirect lighting, you can create individual rhythms and striking designs for walls and ceilings. The pre-shaped tongue-and-groove profiles make installation quick and make it easy to create different combinations.
LUMO Out Sávu Collection is made from Finnish heat-treated aspen. The Sávu Collection heat treatment gives the aspen a deep dark brown tone while retaining the natural, lively character of the wood. The colour is created entirely without chemicals, using only heat and steam. Heat treatment improves the dimensional stability of the wood and reduces its response to changes in humidity.
LUMO Collection was created in collaboration between Pieksäwood, Minna Haapakoski and Cariitti. We saw, heat-treat and plane the LUMO slatted panels from Finnish aspen at our own factory in Pieksämäki, Finland.
Product information
- Product: LUMO Out illuminated slatted panel
- Collection: LUMO Collection / Sávu Collection
- Material: Finnish heat-treated aspen
- Colour: Sávu Collection, dark brown
- Dimensions: 35 × 31 mm
- Profile: LUMO Out
- Light direction: towards the tongue side
- Lighting groove: designed for the Cariitti Sauna Ultra Ambient White Top IP67 LED strip
- Applications: sauna and other interior wall and ceiling surfaces
- Compatible with LUMO Base and LUMO In slatted panels and all other Pieksäwood panels
- Made in Pieksämäki, Finland
LUMO Illuminated Slatted Panel Installation Instructions: Saunas and Wet Areas
LUMO panels are suitable for wall and ceiling panelling in all interior spaces – from saunas to living rooms. However, when installing LUMO illuminated panels on walls in saunas and wet areas, the correct installation direction must always be observed to prevent moisture damage.
Important for wall installation:
- Always install the lighting groove facing downwards.
- The light must point downwards when installed on a wall.
- This prevents water from running into the lighting groove.
- If installed in the wrong direction, the groove can collect water.
- Moisture may damage both the panel and the lighting.
- Incorrect installation direction will void the product warranty.
- Certificates
